|
|
Heat pumps testing methodology
Španihelová, Kateřina ; Kamenský, Petr (referee) ; Hejčík, Jiří (advisor)
This thesis deals with the methodology of heat pumps testing. The first part covers the basic principles of a heat pump from the thermomechanical point of view, the description of the heat pump basic components and low-potential heat sources. The next section describes the parameters of heat pumps according to which we can evaluate their effectiveness. The last part is targeted on the issue of testing heat pumps including a description of the test methods and description of the test heat pump air-water.
|
|
| |
|
|
Development of abrasion resistant concrete
Procházka, David ; Darebník, Zdeněk (referee) ; Hela, Rudolf (advisor)
The resistance of concrete to abrasion is an important feature particularly for transport and water management structures where the surface is exposed to abrasion. Bachelor thesis deals with individual influences on improvement of abrasion resistance of concrete surface. Furthermore, the search of test methods used for testing abroad. In the practical part, we assess the effect of curing agents on resistance to abrasion, water jet and tensile strength by tear-off test.
|
|
|
Wear of hard coatings
Černý, Libor ; Křupka, Ivan (referee) ; Omasta, Milan (advisor)
This bachelor's thesis was made as a description of the main technological methods, which are used in order to manufacture hard coatings. Applications of hard coatings are realized to improve tribological properties of components in various industries. The aim is to minimize the amount of wear and friction losses. Thesis also discusses methods of measuring the hard coatings wear. These methods are important to determine the properties of coating layers and their subsequent use. A lot of testing methods offer sufficient possibilities to test various mechanisms of wear in variety of laboratory conditions. Additionally in the end of the thesis there is an experimental wear measurement of specimen on tribometer using the "Pin on disc" method. Both size and type of the wear are evaluated by profilometer.
|
|
|
Diagnostics of flooring failures and defects in the housing and civic construction
Vrtal, Roman ; Žítt, Petr (referee) ; Schmid, Pavel (advisor)
The object of the thesis is a description of preparation process, realization and subsequent treatment of floors based on calcium sulphate, including problems related to the issue. The aim of the work is to closely acquaint the reader with methods used in diagnostics of flooring failures and defects in the housing and civic construction, including practical applications of these methods on real structures. The work also includes experimental analysis of a real floor construction during local load effect.
|
|
|
Development of abrasion-resistant concrete and testing methods
Procházka, David ; Bodnárová, Lenka (referee) ; Hela, Rudolf (advisor)
This diploma thesis deals with concrete abrasion resistance against abrasion. The constructions of transport and water management structures are most stressed by the action of abrasion by means of travel of vehicles and flowing water. Abrasion reduces the durability of the structures. The prerequisites for achieving the best possible abrasion resistance are examined. Furthermore, test methods that are currently used worldwide. The experimental part deals with the influence of individual types of aggregates amphibolite (Želešice), fecal gravel sand (Žabčice) and basalt (Bílčice) on abrasion resistance. Furthermore, the dependence between the strength of the concrete and the hardness of the surface for abrasion resistance. Abrasion resistance testing was determined by concrete abrasion, abrasion resistance by the Böhm method and by water jet.
|
|
|
Components Testing in Automotive Industry
Tovaryš, Miroslav ; Svída, David (referee) ; Ramík, Pavel (advisor)
Tato bakalářská práce se zaměřuje na testování komponent v automobilovém průmyslu. Nabízí přehled testovacích metod, jejich základní popis a popis testovacích zařízení. V práci jsou také zmíněny CAD systémy, metoda konečných prvků a zrychlené testy, které slouží ke snižování finančních nákladů na testování pomocí omezování počtu testů nebo zkracování testovacích časů. Principy těchto nástrojů jsou zde stručně popsány. Závěr práce shrnuje důvody, které ženou vývoj testovacích metod kupředu.
|
|
|
PCB s Cleaning from Prototypes to Low Series Production
Švéda, Miloš ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
This bachelor thesis deals with the construction of the cleaning unit for prototype and low series production PCB cleaning. It describes the methods used for PCB cleaning, mainly for removing flux residues. It briefly describes the test methods for measuring contamination. It deals with the selection of individual components for cleaning equipment construction and compatible chemistry for flux residues cleaning.
|
|
|
Methods of assessing the durability of concrete against frost and chemical deicing salts in the Czech Republic and in Europe
Žíla, František ; Novosad,, Petr (referee) ; Hubáček, Adam (advisor)
The bachelor thesis deals with the methods of assessing the durability of concretes against frost and chemical deicing salts used in the Czech Republic and Europe. The theoretical part of the thesis describes the basic properties of concrete, the classes of environmental influence, the theory of concrete failure by cyclic freezing and thawing, methods for assessing the durability of concrete against freezing and methods for assessing the durability against water and chemical deicing salts, as well as properties affecting the repeatability and reproducibility of tests. The practical part focuses on testing the resistance of concrete to the action of freezing and chemical thawing agents using the methods according to the standards ČSN 73 1322 and ČSN 73 1326 and also on the influence of concrete surface treatment on the process and result of these tests.
|
|
|
Development of abrasion-resistant concrete and testing methods
Procházka, David ; Bodnárová, Lenka (referee) ; Hela, Rudolf (advisor)
This diploma thesis deals with concrete abrasion resistance against abrasion. The constructions of transport and water management structures are most stressed by the action of abrasion by means of travel of vehicles and flowing water. Abrasion reduces the durability of the structures. The prerequisites for achieving the best possible abrasion resistance are examined. Furthermore, test methods that are currently used worldwide. The experimental part deals with the influence of individual types of aggregates amphibolite (Želešice), fecal gravel sand (Žabčice) and basalt (Bílčice) on abrasion resistance. Furthermore, the dependence between the strength of the concrete and the hardness of the surface for abrasion resistance. Abrasion resistance testing was determined by concrete abrasion, abrasion resistance by the Böhm method and by water jet.
|
guest ::
